GST40A Power Adapter

5 AUD

GST40A

Brand: Mean Well
Stock: 40 pcs
Product quality: 100% new
Warranty: 24 months
GENUINE PRODUCTS GUARANTEED

Categories: ,

GST40A Power Adapter

GST40A Power Adapter
GST40A Power Adapter

SPECIFICATION

ORDER NO. GST40A05-P1J GST40A07-P1J GST40A09-P1J GST40A12-P1J GST40A15-P1J GST40A18-P1J GST40A24-P1J GST40A48-P1J
 

 

 

 

 

 

OUTPUT

 SAFETY MODEL NO. GST40A05 GST40A07 GST40A09 GST40A12 GST40A15 GST40A18 GST40A24 GST40A48
DC VOLTAGE                                 Note.2 5V 7.5V 9V 12V 15V 18V 24V 48V
RATED CURRENT 5A 5.34A 4.45A 3.34A 2.67A 2.22A 1.67A 0.84A
CURRENT RANGE 0 ~ 5A 0 ~ 5.34A 0 ~ 4.45A 0 ~ 3.34A 0 ~ 2.67A 0 ~ 2.22A 0 ~ 1.67A 0 ~ 0.84A
RATED POWER (max.) 25W 40W 40W 40W 40W 40W 40W 40W
RIPPLE & NOISE (max.) Note.3 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 150mVp-p 200mVp-p
VOLTAGE TOLERANCE Note.4 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.5% ±2.5%
LINE REGULATION                                 Note.5 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
LOAD REGULATION ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.5% ±2.5%
SETUP, RISE TIME                                 Note.6 1000ms, 50ms / 230VAC 1000ms, 50ms / 115VAC at full load
HOLD UP TIME (Typ.) 50ms / 230VAC   15ms / 115VAC at full load
 

 

 

INPUT

 VOLTAGE RANGE 90 ~ 264VAC  127 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 84.5% 87.5% 88.5% 89.5% 90% 90% 91% 92%
AC CURRENT (Typ.) 1A / 115VAC    0.5A / 230VAC
INRUSH CURRENT (max.) Cold start  35A / 115AC 65A / 230VAC
LEAKAGE CURRENT(max.) 0.75mA / 240VAC
 

 

PROTECTION

 OVERLOAD 105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 5.2 ~ 6.8V 7.8 ~ 10.2V 9.4 ~ 12.2V 12.6 ~ 16.2V 15.7 ~ 20.3V 18.9 ~ 24.3V 25.2 ~ 32.4V 50.4 ~ 64.8V
Protection type : Shut down o/p voltage, re-power on to recover
 

 

ENVIRONMENT

 WORKING TEMP. -30 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT ±0.03% / ℃ (0~50℃)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
 

 

 

 

 

 

 

 

 

 

 

 

 

SAFETY & EMC

(Note. 8)

 SAFETY STANDARDS Note. 7 UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, CCC GB4943, PSE J60950-1,AS/NZS 60950.1 , BIS IS13252,

KC K60950-1, EAC TP TC 004 approved; SIRIM MS IEC60950-1 (optional) approved
WITHSTAND VOLTAGE I/P-O/P:3KVAC  I/P-FG:2KVAC  O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
 

 

 

 

 

EMC EMISSION

 Parameter Standard Test Level / Note
Conducted emission EN55032(CISPR32),FCC PART 15 / CISPR22 CAN ICES-3(B)/NMB-3(B),CNS13438,GB17625.1 EAC TP TC 020,MSIP KN32  

Class B
 

Radiated emission

 EN55032(CISPR32),FCC PART 15 / CISPR22 CAN ICES-3(B)/NMB-3(B),CNS13438,GB17625.1 EAC TP TC 020,MSIP KN32  

Class B
Harmonic current EN61000-3-2,GB9254 Class A
Voltage flicker EN61000-3-3 ——-
 

 

 

 

 

EMC IMMUNITY

 Parameter Standard Test Level /Note
ESD EN61000-4-2 Level 4, 15KV air; Level 4, 8KV contact
RF field susceptibility EN61000-4-3 Level 2, 3V/m
EFT bursts EN61000-4-4 Level 2, 1KV
Surge susceptibility EN61000-4-5 Level 3, 1KV/Line-Line , 2KV/Line-FG
Conducted susceptibility EN61000-4-6 Level 2, 3V
Magnetic field immunity EN61000-4-8 Level 2, 3A/m
Voltage dips , interruption EN61000-4-11 ＞95% dip 0.5 periods, 30% dip 25 periods,

＞95% interruptions 250 periods
 

OTHERS

 MTBF 736.4K hrs min. MIL-HDBK-217F(25℃)
DIMENSION 125*50*31.5mm (L*W*H)
PACKING 0.28Kg; 40pcs/12.02Kg/1.05CUFT
CONNECTOR PLUG See page 4~5 ; Other type available by customer requested
CABLE See page 4~5 ; Other type available by customer requested
NOTE 1.  All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient.

2.  DC voltage: The output voltage set at point measure by plug terminal & 50% load.

3.  Ripple & noise are measured at 20MHz by using a 12″ twisted pair terminated with a 0.1μf & 47μf capacitor.

4.  Tolerance: includes set up tolerance, line regulation, load regulation.

5.  Line regulation is measured from low line to high line at rated load.

6.  Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.

7.  The demand for Malaysia safety is processed with the order no. GST40A    -SIRIM by request. Please contact MEAN WELL for details.

8.  The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

(as available on meanwellaustralia.au)

12V 1.5A ADAPTOR

 

Contact information: Van Hao Pty Ltd- Mean Well Australia

–  Address: 1A Welfare Parade Ashburton VIC, 3147Australia
– Phone: +61398853030
– Email: meanwell168@gmail.com
– Website: https://meanwellaustralia.au/

Reviews

There are no reviews yet.

Be the first to review “GST40A Power Adapter”