HLG-120H-C- SPEC Din Rail

97 AUD – 99 AUD

HLG-120H-C

Brand: Mean Well
Warranty: 24 months
GENUINE PRODUCTS GUARANTEED

SKU: N/A Category:

HLG-120H-C

Catalogue HLG-120H-C

MODEL HLG-120H-C350 HLG-120H-C500 HLG-120H-C700 HLG-120H-C1050 HLG-120H-C1400
 

 

 

 

OUTPUT

 RATED CURRENT 350mA 500mA 700mA 1050mA 1400mA
RATED POWER 150.5W 150W 150.5W 155.4W 151.2W
CONSTANT CURRENT REGION Note.2 215 ~ 430V 150V ~ 300V 107V ~ 215V 74V ~ 148V 54V ~ 108V
 

CURRENT ADJ. RANGE

 Adjustable for A-Type only (via built-in potentiometer)
175 ~ 350mA 250 ~ 500mA 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA
CURRENT RIPPLE 8.0% max. @rated current
CURRENT TOLERANCE ±5%
SET UP TIME                             Note.4 1000ms / 115VAC 500ms / 230VAC
 

 

 

 

 

 

 

 

INPUT

 VOLTAGE RANGE                             Note.3 90 ~ 305VAC     127 ~ 431VDC

(Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF≧0.98/115VAC, PF≧0.96/230VAC, PF≧0.93/277VAC @full load

(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
TOTAL HARMONIC DISTORTION THD< 20% (@ load≧50% /115VAC, 230VAC; @ load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
EFFICIENCY (Typ.) 94% 94% 94% 94% 93.5%
AC CURRENT (Typ.) 1.6A / 115VAC 0.8 A / 230VAC 0.7A / 277VAC
INRUSH CURRENT(Typ.) COLD START 50A(twidth=600μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT <0.75mA / 277VAC
 

 

PROTECTION

 SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE 475 ~ 495V 335 ~ 355V 240 ~ 260V 165 ~ 175V 120 ~ 130V
Shut down o/p voltage with auto-recovery or re-power on to recovery
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
 

 

 

 

ENVIRONMENT

 WORKING TEMP. Tcase=-40 ~ +90℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP. Tcase=+90℃
WORKING HUMIDITY 10 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃)
VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
 

 

 

SAFETY & EMC

 SAFETY STANDARDS  Note.6 UL8750, CSA C22.2 No. 250.13-12, EN/AS/NZS 61347-1, EN/AS/NZS 61347-2-13, EN62384 independent,GB19510.1,GB19510.14, IP65 or IP67, J61347-1, J61347-2-13, EAC TP TC 004 approved
WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION                              Note.6 Compliance to EN55015, EN61000-3-2 Class C (@ load≧50%) ; EN61000-3-3,GB17743 and GB17625.1, EAC TP TC 020
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020
 

OTHERS

 MTBF 652.2K hrs min. Telcordia SR-332 (Bellcore) ;  191.1K hrs min.                     MIL-HDBK-217F (25℃)
DIMENSION 220*68*38.8mm (L*W*H)
PACKING 1.04Kg; 12pcs/13.5Kg/0.8CUFT

 

Contact information: Van Hao Pty Ltd- Mean Well Australia

–  Address: 1A Welfare Parade Ashburton VIC, 3147Australia
– Phone: +61398853030
– Email: meanwell168@gmail.com / nguonvn.meanwell@gmail.com
– Website: https://meanwellaustralia.au/

Voltage Required

3.3V, 5V, 12V, 15V, 24V, 27V, 36V, 48V

Reviews

There are no reviews yet.

Be the first to review “HLG-120H-C- SPEC Din Rail”