HLG-80H-C Mean Well

87 AUD – 90 AUD

HLG-80H-C

Brand: Mean Well
Product quality: 100% new
Warranty: 24 months
GENUINE PRODUCTS GUARANTEED

 

SKU: 80 Category:

HLG-80H-C

Catalogue HLG-80H-C

MODEL HLG-80H-C350 HLG-80H-C700
 

 

 

 

 

 

OUTPUT

 RATED CURRENT 350mA 700mA
RATED POWER 89.95W 90.3W
CONSTANT CURRENT REGION Note.2 A-Type : 128V ~ 257V           B-Type : 167V ~ 257V A-Type : 64V ~ 129V          B-Type : 84V ~ 129V
 

CURRENT ADJ. RANGE

 Adjustable for A-Type only (via built-in potentiometer)
210 ~ 350mA 420 ~ 700mA
CURRENT RIPPLE 8.0% max. @rated current
CURRENT TOLERANCE ±5%
SET UP TIME                                Note.4 500ms/115VAC, 230VAC
 

 

 

 

 

 

 

 

 

INPUT

  

VOLTAGE RANGE                                Note.3

 90 ~ 305VAC          127 ~ 431VDC

(Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF≧0.98/115VAC, PF≧0.96/230VAC, PF≧0.94/277VAC @full load

(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
TOTAL HARMONIC DISTORTION THD< 20% (@ load≧60% /115VAC, 230VAC; @ load≧75%/277VAC)

(Please refer to “TOTAL HARMONIC DISTORTION (THD)” section)
EFFICIENCY (Typ.) 91.5% 91.5%
AC CURRENT (Typ.) 0.88A / 115VAC           0.45A / 230VAC           0.38A / 277VAC
INRUSH CURRENT(Typ.) COLD START 60A(twidth=410μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER  

4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT <0.75mA / 277VAC
 

 

PROTECTION

 SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
 

OVER VOLTAGE

 300 ~ 340V 150 ~ 170V
Shut down o/p voltage with auto-recovery or re-power on to recovery
OVER TEMPERATURE Shut down o/p voltage, re-power on to recover
 

 

 

 

ENVIRONMENT

 WORKING TEMP. Tcase=-40 ~ +80℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP. Tcase=+80℃
WORKING HUMIDITY 10 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃)
VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
 

 

 

 

SAFETY & EMC

  

SAFETY STANDARDS  Note.6

 UL8750, CSA C22.2 No. 250.0-08, EN/AS/NZS 61347-1,EN/AS/NZS 61347-2-13 independent,GB19510.1,GB19510.14, EAC TP TC 004,IP65 or IP67, J61347-1,J61347-2-13 approved
WITHSTAND VOLTAGE I/P-O/P:3.75KVAC  I/P-FG:2KVAC   O/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION                                Note.6 Compliance to EN55015, EN61000-3-2 Class C (@ load≧50%) ; EN61000-3-3,GB17743 and GB17625.1, EAC TP TC 020
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, heavy industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020
 

 

OTHERS

 MTBF 861.8K hrs min.        Telcordia SR-332 (Bellcore) ;  309.7K hrs min.                            MIL-HDBK-217F (25℃)
DIMENSION 195.6*61.5*38.8  mm (L*W*H)
PACKING 0.84Kg; 16pcs/14.4Kg/0.54CUFT
NOTE 1.  All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.

2.  Please refer to “DRIVING METHODS OF LED MODULE”.

3.  De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.

4.  Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.

5.  The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

6.  To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains.

7.  This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70℃ or less.

8.  Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com

Contact information: Van Hao Pty Ltd- Mean Well Australia

–  Address: 1A Welfare Parade Ashburton VIC, 3147Australia
– Phone: +61398853030
– Email: meanwell168@gmail.com
– Website: https://meanwellaustralia.au/

Voltage Required

3.3V, 5V, 12V, 15V, 24V, 27V, 36V, 48V

Reviews

There are no reviews yet.

Be the first to review “HLG-80H-C Mean Well”